AS 16110.1:2020 pdf Hydrogen generators using fuel processing technologies
1 Scope
This part of ISO 16110 applies to packaged, self-contained or factory matched hydrogen generation
systems with a capacity of less than 400 m 3 /h at 0 °C and 101,325 kPa, herein referred to as hydrogen generators, that convert an input fuel to a hydrogen-rich stream of composition and conditions suitable for the type of device using the hydrogen (e.g. a fuel cell power system or a hydrogen compression,storage and delivery system).
It applies to hydrogen generators using one or a combination of the following input fuels:
— natural gas and other methane-rich gases derived from renewable (biomass) or fossil fuel sources,e.g. landfill gas, digester gas, coal mine gas;
— fuels derived from oil refining, e.g. diesel, gasoline, kerosene, liquefied petroleum gases such as
propane and butane;
— alcohols, esters, ethers, aldehydes, ketones, Fischer-Tropsch liquids and other suitable hydrogen-
rich organic compounds derived from renewable (biomass) or fossil fuel sources, e.g. methanol,
ethanol, di-methyl ether, biodiesel;
— gaseous mixtures containing hydrogen gas, e.g. synthesis gas, town gas.
This part of ISO 16110 is applicable to stationary hydrogen generators intended for indoor and outdoor commercial, industrial, light industrial and residential use.
It aims to cover all significant hazards, hazardous situations and events relevant to hydrogen generators,with the exception of those associated with environmental compatibility (installation conditions), when they are used as intended and under the conditions foreseen by the manufacturer.
NOTE A list of significant hazards and hazardous situations dealt with in this part of ISO 16110 is
found in Annex A.This part of ISO 16110 is a product safety standard suitable for conformity assessment as stated in IEC Guide 104, ISO/IEC Guide 51 and ISO/IEC Guide 7.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 4080, Rubber and plastics hoses and hose assemblies — Determination of permeability to gas
ISO 4413, Hydraulic fluid power — General rules relating to systems
ISO 4414, Pneumatic fluid power — General rules relating to systems
ISO 5388, Stationary air compressors — Safety rules and code of practice
ISO 10439, Petroleum, chemical and gas service industries — Centrifugal compressors
ISO 10440-1, Petroleum and natural gas industries — Rotary-type positive-displacement compressors —Part 1: Process compressors (oil-free)
ISO 10440-2, Petroleum and natural gas industries — Rotary-type positive-displacement compressors —
Part 2: Packaged air compressors (oil-free)
ISO 10442, Petroleum, chemical and gas service industries — Packaged, integrally geared centrifugal
air compressors
ISO 12499:1999, Industrial fans — Mechanical safety of fans — Guarding
ISO 13631, Petroleum and natural gas industries — Packaged reciprocating gas compressors
ISO 13707, Petroleum and natural gas industries — Reciprocating compressors
ISO 13709, Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 13850, Safety of machinery — Emergency stop — Principles for design
ISO 13943, Fire safety — Vocabulary
ISO 14121, Safety of machinery — Principles of risk assessment
ISO 14847, Rotary positive displacement pumps — Technical requirements
ISO 15649, Petroleum and natural gas industries — Piping
ISO 16528 (all parts) , Boilers and pressure vessels
IEC 60079-0:2004, lectrical apparatus for explosive gas atmospheres — Part 0: General requirements
IEC 60079-10:2002, Electrical apparatus for explosive gas atmospheres — Part 10: Classification of
hazardous areas
IEC 60146-1-1, emiconductor convertors — General requirements and line commutated convertors —Part 1-1: Specifications of basic requirements
IEC 60204-1, afety of machinery — Electrical equipment of machines — Part 1: General requirements
IEC 60335-1:2004, ousehold and similar electrical appliances — Safety — Part 1: General requirements
IEC 60335-2-41, Household and similar electrical appliances — Safety — Part 2-41: Particular
requirements for pumps
IEC 60335-2-51, Household and similar electrical appliances — Safety — Part 2-51: Particular requirements
for stationary circulation pumps for heating and service water installations
IEC 60529:2001, Degrees of protection provided by enclosures (IP Code)
IEC 60664 (all parts), Insulation coordination for equipment within low-voltage systems
IEC 60704-3, Household and similar electrical appliances — Test code for the determination of airborne acoustical noise — Part 3: Procedure for determining and verifying declared noise emission values
IEC 60730-1, utomatic electrical controls for household and similar use — Part 1: General requirements
IEC 60730-2-5, Automatic electrical controls for household and similar use — Part 2-5: Particular
requirements for automatic electrical burner control systems
IEC 60730-2-6, Automatic electrical controls for household and similar use — Part 2-6: Particular
requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-9, Automatic electrical controls for household and similar use — Part 2-9: Particular
requirements for temperature sensing controls
IEC 60730-2-17, Automatic electrical controls for household and similar use — Part 2-17: Particular
requirements for electrically operated gas valves, including mechanical requirements
AS 16110.1:2020 pdf Hydrogen generators using fuel processing technologies
