IEC 60092-353:2011 pdf Electrical installations in ships – Part 353: Power cables for rated voltages 1 kV and 3 kV
1 Scope and object
This part of the IEC 60092 series is applicable to shipboard and offshore non radial field power
cables with extruded solid insulation, having a voltage rating of 0,6/1 (1 ,2) kV and
1 ,8/3 (3,6) kV intended for fixed installations.
Cables for use in circuits requiring resistance to fire are included.
The various types of power cables are given in 5.1 . The constructional requirements and test
methods shall comply with those indicated in IEC 60092-350, unless otherwise specified in this
standard.
The object of this standard is:
– to standardize cables whose safety and reliability is ensured when they are installed in
accordance with the requirements of IEC 60092-352 or IEC 61 892-4;
– to lay down standard manufacturing requirements and characteristics of such cables
directly or indirectly bearing on safety;
– to specify test methods for checking conformity with those requirements.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60038:2009, IEC standard voltages
IEC 60050-461 :2008, International electrotechnical vocabulary – Part 461: Electric cables
IEC 60092-350, Electrical installations in ships – Part 350: General construction and test
methods of power, control and instrumentation cables for shipboard and offshore applications
IEC 60092-351 , Electrical installations in ships – Part 351: Insulating materials for shipboard
and offshore units, power, control, instrumentation, telecommunication and data cables
IEC 60092-352, Electrical installations in ships – Part 352: Choice and installation of electrical
cables
IEC 60092-359, Electrical installations in ships – Part 359: Sheathing materials for shipboard
power and telecommunication cables
IEC 60228:2004, Conductors of insulated cables
IEC 60331 -1 :2009, Tests for electric cables under fire conditions – Circuit integrity – Part 1:
Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage
up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
IEC 60331 -2:2009, Tests for electric cables under fire conditions – Circuit integrity – Part 2:
Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage
up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
IEC 60331 -1 1 :1 999, Tests for electric cables under fire conditions – Circuit integrity – Part 11:
Apparatus – Fire alone at a flame temperature of at least 750 °C Amendment 1 (2009)
IEC 60331 -21 :1 999, Tests for electric cables under fire conditions – Circuit integrity – Part 21:
Procedures and requirements – Cables of rated voltage up to and including 0,6/1,0 kV
IEC 60332-1 -2:2004, Tests on electric and optical fibre cables under fire conditions – Part 1-2:
Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW
pre-mixed flame
IEC 60332-3-22:2000, Tests on electric cables under fire conditions – Part 3-22: Test for
vertical flame spread of vertically-mounted bunched wires or cables – Category A
Amendment 1 (2008) 2
IEC 60445:201 0, Basic and safety principles for man-machine interface, marking and
identification – Identification of equipment terminals, conductor terminations and conductors
IEC 60684-2:1997, Flexible insulating sleeving – Part 2: Methods of test
Amendment 1 (2003) 3
IEC 60754-1 :1 994, Test on gases evolved during combustion of materials from cables – Part 1:
Determination of the amount of halogen acid gas
IEC 60754-2:1991, Test on gases evolved during combustion of electric cables – Part 2:
Determination of degree of acidity of gases evolved during the combustion of materials taken
from electric cables by measuring pH and conductivity
Amendment 1 (1 997)
IEC 61 034-1 :2005, Measurement of smoke density of cables burning under defined conditions
– Part 1: Test apparatus
IEC 61 034-2:2005, Measurement of smoke density of cables burning under defined conditions
– Part 2: Test procedure and requirements
IEC 61 892-4, Mobile and fixed offshore units – Electrical installations – Part 4: Cable
IEC 60092-353:2011 pdf Electrical installations in ships – Part 353: Power cables for rated voltages 1 kV and 3 kV
