IEC 60227-3:1997 pdf download

IEC 60227-3:1997 pdf download.Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 3: Non-sheathed cables for fixed wiring
1 General
1.1 Scope
This part of IEC 60227 details the particular specifications for polyvinyl chloride insulated
single-core non-sheathed cables for fixed wiring of rated voltages up to and including 450/750 V.
All cables shall comply with the appropriate requirements given in IEC 60227-1 and the
individual types of cables shall each comply with the particular requirements of this part.
1.2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this part of IEC 60227. At the time of publication, the editions indicated
were valid. All normative documents are subject to revision and parties to agreements based
on this part of IEC 60227 are encouraged to investigate the possibility of applying the most
recent editions of the normative documents listed below. Members of IEC and ISO maintain
registers of currently valid International Standards.
IEC 60227-1 :1 993, Polyvinyl chloride insulated cables of rated voltage up to and including
450/750 V – Part 1 : General requirements *
IEC 60227-2:1 979, Polyvinyl chloride insulated cables of rated voltage up to and including
450/750 V – Part 2: Test methods *
IEC 60228:1 978, Conductors of insulated cables
First supplement 60228A (1 982), amendment 1 (1 993)
IEC 60332-1 :1 979, Tests on electric cables under fire conditions – Part 1 : Test on a single
vertical insulated wire or cable
IEC 6081 1 -1 -1 :1 993, Common test methods for insulating and sheathing materials of electric
cables – Part 1 : Methods for general application – Section One: Measurement of thickness and
overall dimensions – Tests for determining the mechanical properties
Amendement 1 (1 988). Amendment 2 (1 989)
IEC 6081 1 -1 -2:1 985, Common test methods for insulating and sheathing materials of electric
cables – Part 1 : Methods for general application – Section Two: Thermal ageing methods
Amendment 1 (1 989)
IEC 6081 1 -1 -4:1 985, Common test methods for insulating and sheathing materials of electric
cables – Part 1 : Methods for general application – Section Four: Tests at low temperature
IEC 6081 1 -3-1 :1 985, Common test methods for insulating and sheathing materials of electric
cables – Part 3: Methods specific to PVC compounds – Section One: Pressure test at high
temperature – Tests for resistance to cracking
IEC 6081 1 -3-2:1 985, Common test methods for insulating and sheathing materials of electric
cables – Part 3: Methods specific to PVC compounds – Section Two: Loss of mass test –
Thermal stability tests