IEC Standards - Page 2 of 14 - Free Standard Document

There are about more than two hundred IEC Standards here.Some of them may be helpful to you.Some researchers are looking for these standards.

IEC 60309-2:2021 pdf Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes

September 10, 2022 admin IEC Standards

IEC 60309-2:2021 pdf Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes 1 Scope This document applies to plugs, fixed or portable socket-outlets, and appliance inlets, hereinafter referred to as accessories, with a

IEC 60331-1:2009 pdf Tests for electric cables under fire conditions – Circuit integrity- Part 1: Test method for fire with shock at a temperature of at least 830。C for cables of rated voltage up to and including 0,6/1 ,0 kV and with an overall diameter exceeding 20 mm

September 10, 2022 admin IEC Standards

IEC 60331-1:2009 pdf Tests for electric cables under fire conditions – Circuit integrity- Part 1: Test method for fire with shock at a temperature of at least 830。C for cables of rated voltage up to

IEC 60300-3-5:2001 pdf Dependability management – Part 3-5: Application guide – Reliability test conditions and statistical test principles

September 10, 2022 admin IEC Standards

IEC 60300-3-5:2001 pdf Dependability management – Part 3-5: Application guide – Reliability test conditions and statistical test principles 1 Scope This part of IEC 60300 provides guidelines for the planning and performing of reliability tests

IEC 60270:2000 pdf High-voltage test techniques – Partial discharge meas urements

September 10, 2022 admin IEC Standards

IEC 60270:2000 pdf High-voltage test techniques – Partial discharge meas urements 1 Scope This International Standard is applicable to the measurement of partial dis charges which occur in electrical apparatus, components or systems when tested

IEC 60287-3-2:2012 pdf Electric cables – Calculation of the current rating – Part 3-2: Sections on operating conditions – Economic optimization of power cable size

September 10, 2022 admin IEC Standards

IEC 60287-3-2:2012 pdf Electric cables – Calculation of the current rating – Part 3-2: Sections on operating conditions – Economic optimization of power cable size 1 Scope This part of IEC 60287 sets out a

IEC 60038:2009 pdf IEC standard voltages

September 10, 2022 admin IEC Standards

IEC 60038:2009 pdf IEC standard voltages 1 Scope This publication applies to – a.c. transmission, distribution and utilization systems and equipment for use in such systems with standard frequencies 50 Hz and 60 Hz having

IEC 60068-2-5:2010 pdf Environmental testing – Part 2-5: Tests – Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing

September 10, 2022 admin IEC Standards

IEC 60068-2-5:2010 pdf Environmental testing – Part 2-5: Tests – Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing 1 Scope and object This part of IEC 60068 provides guidance

IEC 60068-3-5:2001 pdf Environmental testing – Part 3-5: Supporting documentation and guidance – Confirmation of the performance of temperature chambers

September 10, 2022 admin IEC Standards

IEC 60068-3-5:2001 pdf Environmental testing – Part 3-5: Supporting documentation and guidance – Confirmation of the performance of temperature chambers 1 Scope This part of IEC 60068 provides a uniform and reproducible method of confirming

IEC 60034-15:1995 pdf Rotating electrical machines – Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils

September 10, 2022 admin IEC Standards

IEC 60034-15:1995 pdf Rotating electrical machines – Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils 1 Scope This part of IEC 34 specifies the rated phase-to-earth impulse voltage withstand

IEC 60068-2-53:2010 pdf Environmental testing – Part 2-53: Tests and guidance – Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

September 10, 2022 admin IEC Standards

IEC 60068-2-53:2010 pdf Environmental testing – Part 2-53: Tests and guidance – Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests 1 Scope This part of IEC 60068 provides a description of test methods and guidance for